Jayakumar Jayaraman is a Principal,G.H.Raisoni College of Engineering  Ahmednagar, Maharashtra,India

Jayakumar Jayaraman


Organizing committee


G.H.Raisoni College of Engineering Ahmednagar, Maharashtra


Received Ph.D. degree from Annamalai University, Tamilnadu, India and graduations from University of Pune. Having 26.5 years of vast experience in teaching and research. Presently working as Principal in G.H.Raisoni College of Engineering, Ahmednagar, Maharshtra, India. Previously worked at Dr.Vithalrao Vikhe Patil College of Engineering, Ahmednagar, India at various levels from Assistant Professor to Principal. He has completed various research projects through grants received from funding agencies like All India Council for Technical Education(AICTE), Department of Science and Technology(DST) Government of India and Pune University.


He has examined UG and PG projects of Wits Watersrand University, Johannesburg, South Africa, and Evaluated project thesis. He has visited Bangkok, Thailand to attend an International Conference to chair a session and presented a Technical Paper. He is a Reviewer in the Journal “Metallurgical and Material Science A”, Springer Publications and in the Journal “ Materials & Design”, Elsevier Publications.


He is a Life Member of Indian Society for Technical Education (LMISTE),Fellow Member of Institution of Engineers (FIE),Fellow member of Indian Society of Mechanical Engineers (FISME),Life Member of Powder Metallurgy Association of India (PMAI),Member of International Association of Computer Science and Information Technology (ISCSIT).


  1. Ajit S.Dange, Jayakumar.J “Evaluation of Mechanical and Wear Properties of Aluminium-Al2O3 Composite Material”, published in “International Research Journal of Engineering & Technology”, volume 5, Issue 8, August 2018, PP 14401447.
  2. Ganesh R Jamgaonkar, J. Jayakumar, Sagar K More “Fabrication of Mg Alloy-CNT Nanocomposite for Automobile Wheel Rim Applications”, Published in “International Journal of Current Engineering and Technology”, Volume 6, No.5 (Sept/Oct 2016) PP 1752-1757.
  3. Pritam Wagh, J.Jayakumar “Investigation on Microstructure and Mechanical Properties of Aluminum reinforced with MWCNT and Nano-SiC”, published in “International Journal of Engineering and Computer Science”, Volume 5 Issue 09 September 2016, PP 18132-18134.
  4. Akash D Dhane, Jayakumar Jayaraman, “Optimization and Investigation of MgAlloy with MWCNT NanoComposites for Connecting Rod Application”, published in “International Journal Of Engineering And Computer Science”, Volume 5 Issue 09 September 2016 PP 18005-18011.
  5. Ramesh S. Gadakh, J.Jayakumar “Fabrication and Characterization of MgMWCNT & AZ31-MWCNT Nano composites”, published in “International Journal of Science Technology & Engineering”,Volume 2, Issue 11, May 2016.
  6. S.A.Deshmukh, J.Jayakumar “Synthesis and Fabrication Cu/CNT Composite by Stir Casting and Powder Metallurgy Process”, published in “International Engineering Research Journal (IERJ)”Special Issue 2, 2015 PP 2971-2975. 
  7. Suhas Sawant, Jayaraman Jayakumar “Study on Mechanical Properties of Hot Extruded Az91mwcnt Composites Fabricated By Stir Casting”, published in “International Journal of Innovation in Engineering, Research and Technology [IJIERT] ICITDCEME’15 Conference Proceedings”, PP 1-5.
  8. Suhas Sawant, Jayaraman Jayakumar “Synthesis of Hot Extruded AZ91MWCNT Nano composites by Stir Casting”, published in “International Engineering Research Journal (IERJ)” Special Issue 2, 2015 PP 2979-2983.
  9. J.Jayakumar, Raghunath B.K, Berad S.T “Effect of CNTs on Mechanical Properties  of Mg-CNT Nano Composites Synthesized Through Stir Casting ”,  published  in “Journal of  Nano Science, Nano Engineering and Applications”, Volume 5, Issue 3, 2015, PP 60-66.
  10. Berad S.T, Jayakumar.J,  “Fabrication & Characterization of Mg-MWCNT & AZ31MWCNT Nano Composites”, Published in “International Journal of Innovative Research in Science,Engineering and Technology”, Volume 4, Issue 6, June 2015, PP 4431-4436.
  11. J.Jayakumar, Raghunath B.K, Rao T.H, Investigation on wear properties of AZ31MWCNT nanocomposites fabricated through mechanical alloying and powder metallurgy, published in “Science and Engineering of Composite Materials”, 01/2014; http://DOI: 10.1515/secm-2014-0056. 
  12. J.Jayakumar, Raghunath B.K, Rao T H, “Investigation on Fracture Mechanisms in Mg alloy AZ31 Nano Composites Reinforced with Multi Wall Carbon Nano Tubes”, published in “International Journal of Innovative Research in Science,Engineering and Technology”, Vol II,Issue 9,Sep 2013,pages 4753-4758.
  13. J.Jayakumar,Raghunath B.K, Rao T.H, “Effect of High Energy Ball Milling on Microstructure and Mechanical Properties of Mg-CNT Nano Composites”,published in “International Journal of Advances in Management, Technology & Engineering Sciences”, Volume II, Issue 8(I),May 2013,Pages 15-19.
  14. J.Jayakumar, Raghunath B.K, Rao T.H, “Fabrication  and Characterization of Magnesium Matrix  Nano Composites  Reinforced  with Multi Wall Carbon Nano Tubes ”, published in “Journal of  Polymer and Composites”, Volume 1,Issue 1,April 2013,Pages 17-21.
  15. J.Jayakumar, Raghunath B.K, Rao T.H, “Recent Development and Challenges in Synthesis of  Magnesium Matrix Nano Composites- A Review”, published in “International Journal of Latest Research in Science and Technology”, Vol 1,Issue 2,Jul-Aug 2012,pages 164-171.  
  16. J.Jayakumar, Raghunath B.K, Rao T.H, “Synthesis and Characterization of Novel Carbon Nano Tube Reinforced  Aluminium Nano Composites Through Powder Metallurgy Process”, published in “Journal of  Nano Science and Engineering”, Volume 2,Issue 1,April 2012,Pages 1-5.
  17. J.Jayakumar, Raghunath B.K, Rao T.H, “Study on hot working characteristics and Deformation Response of as Cast AZ91 Mg  Alloys”, published in “Journal of Materials and Metallurgical Engineering”, Volume 1 Issue 2, November 2011, Pages 1-10.  

Research Publications: Conferences(5)

  1. Delivered an expert lecture on “Development of Metal Matrix Nano Composites”,in a state level seminar organized by “Shri Saibaba Institute of Engineering”,Rahata, Maharashtra,India.
  2. Presented and published a research paper on “Effect of High Energy Ball milling on Microstructure and Mechanical Properties of Mg-MWCNT Nano Composites”,in an International Conference  held on 17th and 18th May 2013 at Bangkok, Thailand.
  3. Presented and published a paper on “Fabrication and Characterization of Mg Nano Composites Reinforced with MWCNTs Using Powder Metallurgy” in an International Conference organized by “Powder Metallurgy Association of India”, between 7/02/2013 to 9/02/2013 at Pune, India.
  4. Presented and published a paper on “Synthesis And Characterization     Techniques of Nano Composite Materials” in a National level Conference organized by “Jain University”, Bangalore, India.
  5. Presented and published a paper on “Trends In Metal Matrix Composites” in a National Conference organized by K.K.Wagh Institute of  Technology, Nashik, Maharashtra, India.


Synthesis of Metal Matrix Composites, Nano Composites, Nano Materials, Ball milling, Vaccuum Stir Casting , Disintegrated melt deposition.